Step by Step Instructions to Refacing
You're viewing an older version of these instructions.  Click here for my latest version

Getting Started

  • Remove your old doors by removing the screws from the hinges (1).  If you plan to use the old hinges, keep hinges and screws together in a convenient location.
  • Remove drawers from cabinets and set aside.  You'll be replacing the drawer fronts in step 3.
  • Next, remove any cabinet moldings (2).  You should be able to pull it up easily using the tip of a flathead screwdriver or small nail bar.
  • Remove any loose and /or peeling coatings from any surface you plan to cover with self-adhesive covering (SAC).  Any depressions left in the surface should be filled with wood putty and sanded smooth.
  • Lightly sand any surfaces you plan to cover with self-adhesive coverings, using 150 grit sandpaper (3).  DO NOT USE A POWER SANDER.  Just scuff the surface.  This will ensure a good bond when applying self-adhesive covering.
  • Clean the surface with a mild dishwashing liquid and water.  DO NOT WET-SOAK, especially if the wood surface is exposed.  Rinse with a damp rag and allow to dry thoroughly.  Use household ammonia to remove wax.  Read the manufacturer's warning and instructions before using.
  • Remove any dust or sand particles with tack cloth before applying self-adhesive coverings.


Next Steps--Home